 |
99103 HVAC/R DIGITAL MANIFOLD |
|
||
|
Mastercool introduces the most advanced and user friendly Digital Manifold on the Market today! This manifold offers a large easy to read LCD that displays Pressures, Saturated Temperatures, actual temperatures, Superheat and Subcooling temperatures for over 60 refrigerants. When used with the clamp on Thermocouple connector it will display the actual temperature and automatically calculate the superheat or subcool temperature. When vacuum sensor cable is attached to the manifold it will display deep vacuum. To insure lasting performance and durability the manifold case is constructed of ABS material and protected by a rugged rubber boot. The technician now has a fully functional manifold with the intelligence to quickly access and deliver the accurate information needed to do the right job! SPECIFICATIONS: • Pressure Display: PSI, INHg, Bar, MPa, Kg/cm2 • Temperature Display: °F or °C • Deep Vacuum Display: Micron, mBar, KPa, mmHg • Sensing Resolution: 1 psi (.07 Bar, .007 MPa, .07 Kg/cm2) • Sensing Accuracy: ±1 psi or 1% of reading (whichever is greater) • Working Pressure: 0 to 750 psi (52 Bar, 5 MPa, 52 Kg/cm2) • Proof Pressure: 1000 psi (70 Bar, 7 MPa, 70 Kg/cm2) (Tolerable pressure without internal damage) • Refrigerant Temperature Range: -40 to 200°F (-40 to 93°C) • Operating Temperature: 32 to 122°F (0 to 45°C) • Temperature Accuracy: ±1˚F (±0.5˚C) between 32 to 160˚F (0 to 71˚C) • Storage Temperature: 10 to 120˚F (12 to 49˚C) • Connections: 1/4” M-Flare • Power: 9V DC battery with optional AC/DC adapter • Battery Life: 30-36 hours pressure and temperature mode only (continuous use) 25-30 hours vacuum and backlight mode (continuous use) • Auto-Off: 15 min. with disabling capability |
||||
 |
99134 R134a DIGITAL MANIFOLD |
|
||
|
Mastercool introduces the most advanced and user friendly Digital Manifold on the Market today! This manifold offers a large easy to read LCD that displays pressure and vacuum readings for R134a. Easily allows the technician to distinguish pressure and vacuum readings and perform systems leak check at the conclusion of the evacuation process. To insure lasting performance and durability the manifold case is constructed of ABS material and protected by a rugged rubber boot. The technician now has a fully functional manifold with the intelligence to quickly access and deliver the accurate information needed to do the job right! SPECIFICATIONS: • Refrigerant: R134a • Pressure & Vacuum Display: Low Side - PSI, Bar, MPa, kg/cm2 & InHg High Side - PSI, Bar, MPa, kg/cm2 • Temperature Display: -40 to 200°F (-4 to 93°C) • Response Time: 250 mSec. • Connection: 1/2” acme or 1/4” flare • Operating Temperature: 32 to 122°F (0 to 45°C) • Power: 9V DC battery • Battery Life: 350 hours continuous use • Low Battery Indicator: Special ICON on LCD |
||||
 |
98061 VACUUM GAUGE |
|
||
|
As a professional technician the assurance of a deep vacuum on a system is imperative. The main problem with many small handheld units is their inaccuracy and durability. Although the thermocouple sensor has been proven to be much more accurate and durable than the thermister type, the problem has been the inconvenience of a cumbersome tabletop unit. Mastercool is introducing a hand held unit using thermocouple technology. This vacuum gauge has been designed with the technician’s field environment in mind, allowing for self-calibration and a sensor that will not be damaged by small mists of oil. The Mastercool unit allows for a target vacuum range to be programmed with a light sensor indicator. Now you have the freedom to continue with your other work and come back to the system once you see the indicator light signaling your target vacuum. SPECIFICATIONS: • Response Time: 250 mSec. • Sensor Cable: Spiral cable extended to 6.5 ft. (2.6m) • Sensor: Thermocouple sensor • Connect Fitting: 1/4" flare female adapter • Operating Temperature: 32°F to 120°F (0°C to 45°) • Power: 9V DC battery (AC/DC Adapter Optional) • Battery Life: 15 hours • Low Battery Indicator: Special ICON on LCD • Vacuum Units: Micron, Torr, mTorr, mmHg, mBar, Pa, InHg |
||||
 |
72029, 72035: BALL BEARING TUBE CUTTERS |
|
||
| Mastercool's New EZ Tube Cutters offer the latest "Reduced Friction" technology! Our new reduced friction design incorporates ball bearings into the cutter wheel, tube rollers, and a control knob. Reducing the resistance in these hgh friction areas allows the cutter to roll fast and easy as it slices through the tube. The new "Reduced Friction" design is sure to save time and reduce fatigue! | ||||
 |
52224-B DUAL TEMP INFRARED THERMOMETER |
|
||
|
Features both infrared and contact thermometer technologies. Includes programmable HI/LO alarms, and Lock Mode to capture temperature readings. The built-in K type jack offers optional contact functions. SPECIFICATIONS: • Non-Contact Temperature Range: -76 to 1200°F (-60 to 648°C) • Field Of View: 15 : 1 • Laser Targeting • Adjustable emissivity • Backlit LCD Display • MIN, MAX, DIFF and AVG reading • Programmable HI/LO Alarm |
||||
 |
52225-A DUAL TEMP PLUS INFRARED THERMOMETER |
|
||
| The 52225-A Dual Temp Plus features both infrared and contact thermometer technologies. The infrared function includes advanced 30 : 1 optics to measure small targets at longer distances, laser targeting, programmable HI/LO alarms, adjustable emissivity and Lock Mode to capture temperature readings. The contact function offers a built-in K type jack and comes with a 3 ft (1 meter) thermocouple probe. Optional probes are available. SPECIFICATIONS: • Non-Contact Temp Range: -76 to 1400ºF (-60 to 760ºC) • Thermocouple Probe Range: -83 to 1999ºF (-64 to 1400ºC) • Field of View Ratio: 30 : 1 • Laser Targeting • Adjustable emissivity • Backlit LCD Display • MIN, MAX, DIFF and AVG reading • Programmable HI/LO Alarm |
||||
 |
52225-B ULTRA TEMP DUAL LASER THERMOMETER |
|
||
|
Features both infrared and contact thermometer technologies. Includes programmable HI/LO alarms, and Lock Mode to capture temperature readings. The built-in K type jack offers optional contact functions. Illuminates working area with built-in LED light. SPECIFICATIONS: • Non-Contact Temperature Range: -76 to 1832°F (-60 to 1000°C) • Thermocouple Probe Range: -83 to 1999ºF (-64 to 1400ºC) • Field of View: 50 : 1 • Laser Targeting • Adjustable emissivity • Backlit LCD Display • MIN, MAX, DIFF and AVG reading • Programmable HI/LO Alarm |
||||
 |
91680 MOBILE ELECTRONIC CHARGING STATION |
|
||
| Keeping the same ideals in mind as the Portable Electronic Charging Station, Mastercool introduces its new mobile unit directed more for the garage technician. With an enlarged carry cart and larger wheels, this new unit can get around the shop with the greatest of ease! | ||||
 |
52229 HANDHELD WATERPROOF DIGITAL THERMOMETER |
|
||
|
• Measuring Range: -58 to 572°F (-50 to 300°C) • Wide Measurement Range • Maximum/Minimum temperature memory • Celsius and Fahrenheit exchange • Date hold function • High/Low temperature setting • Key tone for operation confirmation • Stainless steel probe • Foldaway Stand |
||||
| Featured Items | Site Map |