_COMPRESSOR SERVICE TOOLS

91274
MASTER CLUTCH SERVICE TOOL SET
The Set contains all the tools needed to service clutches on the following compressors: General Motors A6, R4, and DA6; 6 Pole R4, V5 and HR-6; Ford FS6; Chrysler C171; Nippondenso 6P 148A; Sanden 507, 508 and 510 and Pitts and Warner clutches.
Contains:
90291 Coil Puller Jaws
90292 Coil Installer
90343 Compressor Holding Fixture
& Hardware
90346 Rotor & Bearing Pilot
90349 Clutch Assembly Installer
90443 Pulley Bearing Remover & Driver
90451 Pulley Arbor
90452 Pulley Removal Jaws
90455 Pulley Removal Pilot
90456 Pulley Hub Removal Pilot
90457 Puller Body
90903 External Retaining Ring Pliers
91012 Shaft Protector Pilot
91022 Rotor & Bearing Puller Jaws
91023 Rotor & Bearing Puller Arbor
91047 Tool Box
91058 Pulley Remover Jaws
91059 Bearing & Pulley Installer
91146 Feeler Gauge Set
91183 A/C Service Manual
91216 Coil Installer Tie Bolt Set
91218 GM Compressor Test Plate
91261 Holding Fixture and Hardware
92210 Clutch Bearing Staking Tool
All tools available individually.

91268
MASTER SEAL SERVICE TOOL SET
The set includes all the tools from 91269, 91270, 91271, 91272 and 91273 in a rugged metal tool box. Easy to understand instruction manual will show you step-by-step how to service all the popular compressors.
Contains:
90383 Internal Snap Ring Pliers
90412 O-Ring Seal Sleeve Remover
90414 Seal Seat Remover
90415 Seal Remover & Installer
90431 York & Tecumseh Oil Level Dipstick
90432 Chrysler Oil Level Dipstick
90440 5/8" x 2" x 11 NC Clutch Remover
90441 5/8" x 2" x 18 SAE Clutch Remover
90454 Clutch Plate Remover
90458 Clutch Plate Installer
90460 O-Ring Installation Guide
90462 Seal Seat Installer
90473 Seal Remover
90474 Seal Installer & Plate Alignment
90484 Seal Protector
90486 Ceramic Seal Seat Remover & Installer
90499 Universal Clutch Holding Tool
90902 Clutch Plate Puller
90906 Seal Remover & Installer
90907 Seal Protector Sleeve
90910 Clutch Plate Installer
91047 Tool Box
91052 Clutch Plate Installer
91060 Seal Seat Remover
91061 Seal Seat Installer
91122 Clutch Plate Remover
91183 A/C Service Manual
91195 Clutch Plate Remover Arbor
91202 O-Ring Installation Guide
91208 Seal Remover & Installer
91211 Shaft Protector
91212 Clutch Plate Remover
91213 Clutch Plate Installer
91214 O-Ring & Snap-Ring Installer
91215 O-Ring Installation Guide
All tools available individually.

91267
MASTER SEAL & CLUTCH SERVICE TOOL SET
The set includes all Seal Service Tools contained in 91268 and Clutch Service Tools contained in 91274. Tools are stored in a sturdy tool chest (92275) and organized in two drawers with a chart showing which tools are used for a specific compressor. The top part of the tool chest serves as a storage area for fittings and air conditioning test equipment. Space is reserved in the third drawer for an optional Foreign Compressor Seal and Clutch Service Tool Set (91323).

91323
IMPORT SEAL & CLUTCH SERVICE TOOL SET
Designed to be included with tool set 91267. When used with tools in the 91267 Master Clutch & Seal set, will service the following compressors: Diesel Kiki - DKS-12B & DKS-15B; 13S, 15S, 17S/ Ford - FX-15 / FS-10 / Hitachi - C-3817; MJS-130, MJS-157, MJS-170, MJ-123, MJ-167, WP-123, SWP-167 / Mitsubishi - SA430, SA439 / Nippondenso - 6P-148A,10P-13A, 10P-15C / Ogura - OW-100, OW-135 / Sanden - SD 505, SD 507, SD 508, / SD 510, SD 575 / Seiko-Seiki - SS 808S / Tecumseh - HR-980
Contains:
90311 Tecumseh HR-980 Clutch Pulley Retaining Nut Remover/Installer
90312 Tecumseh HR-980 Dust Cap Remover
90385 York Seal Remover & Installer
90390 Ogura/York Bearing Driver
90396 Ogura/York 6” Clutch Bearing Installer 90901 Ogura/Sankyo Clutch Holding Tool
90905 Sanden Seal Seat Remover & Installer
90916 Sanden Oil Level Dipstick
90917 Sanden Clutch & Pulley Removal Jaws
90922 Sanden Pilot Studs
90926 Sanden Clutch Installer Pilot
91043 Diesel Kiki Valve Plate Remover
91044 Diesel Kiki Lock Nut Remover & Installer
91045 Diesel Kiki Drive Plate Remover
91073 Sanden 505 Seal Seat Remover & Installer
91074 Sanden 505 Bearing & Pulley Installer
91075 Sanden 505 Seal Protector Sleeve
91076 Sanden 505 Pulley & Clutch Removal Jaws
91077 Sanden 505 Shaft Protector Pilot
91090 Mitsubishi Seal Seat Remover
91091 Mitsubishi Seal Remover & Installer
91104 Ogura Retaining Nut Remover/Installer
91105 Ogura Seal Seat Remover/Installer
91106 Ogura Seal Remover/Installer
91134 Diesel Kiki Clutch Puller Thrust Pin
91135 Diesel Kiki Snap-Ring, O-Ring, Felt Installer
91137 Diesel Kiki Pulley Pilot
91138 Diesel Kiki Seal Remover/Installer
91139 Diesel Kiki Seal Seat Remover/Installer
91171 Mitsubishi Seal Seat Remover Lock Sleeve
91190 Mitsubishi Pulley Puller Pilot
91289 Diesel Kiki Seal Protector
91316 Diesel Kiki Clutch Plate Puller
91326 FX-15 / FS-10 Shaft Seal Remover
91327 FX-15 / FS-10 Shaft Seal Installer
91328 FX-15 / FS-10 Seal Protector
91329 FX-15 / FS-10 Internal Snap Ring Remover
All tools available individually.

91333
IMPORT COMPRESSOR SEAL & CLUTCH SERVICE TOOL SET
Contains all tools in set 91323 (IMPORT COMPRESSOR SEAL AND CLUTCH TOOL SET) and comes with 91183 air conditioning manual in a rugged metal flat tool box.

91340
UNIVERSAL SEAL & CLUTCH SERVICE TOOL SET
Contains all tools in sets 91323 (IMPORT COMPRESSOR SEAL AND CLUTCH TOOL SET), 91268 (MASTER SEAL SERVICE TOOL SET) and 91274 (MASTER CLUTCH SERVICE TOOL SET) and comes in a rugged metal three drawer tool box.

91141
DIESEL KIKI (ZEXEL) SEAL & CLUTCH TOOL SET
Services standard Diesel Kiki and York compressor models DKS 12 and DKS 15. Complete with tool box and instructions.
Contains:
90383 Internal Snap-Ring Pliers
90386 Compressor Holding Fixture
90390 Pulley Bearing Driver
90396 6” Clutch Bearing Installer
90412 O-Ring Seal Sleeve Remover
90414 Seal Seat Remover
90451 Pulley Puller Arbor
90457 Universal Puller Body
90462 Seal Seat Installer
90499 Universal Clutch Holding Tool
90903 External Snap-ring Pliers
90906 Seal Remover & Installer
90910 Clutch Plate Installer
90923 Internal Snap-Ring Pliers
91047 Tool Box
91043 Valve Plate Remover
91044 Lock Nut Remover & Installer
91045 Clutch Plate Remover
91058 Pulley Removal Jaws
91074 Bearing & Pulley Installer
91134 Thrust Bolt Shim Gauge
91135 Snap-Ring, O-Ring, Felt Installer
91137 Pulley Puller Pilot
91138 Seal Remover & Installer
91139 Seal Remover & Installer
91146 Universal Feeler Gauge Set
All tools available individually.

91292
MASTER SANDEN COMPRESSOR SERVICE TOOL SET
All specialized tools necessary to service seal, clutch and clutch bearing on Sanden 505, 507, 508, 510 and 575. Complete with tool box and instructions.
Contains:
90381 Holding Fixture & Hardware
90383 Internal Snap Ring Plier
90385 York Seal Remover/Installer
90412 O-Ring Seal Sleeve Remover
90414 Seal Seat Remover
90443 Pulley Bearing Remover/Driver
90451 Pulley Arbor
90457 Puller Body
90901 Clutch Holder
90902 Clutch Plate Puller
90903 External Retainer Remover/Installer
90905 Seal Retainer Remover/Installer
90906 Seal Remover & Installer
90907 Seal Protector Sleeve
90910 Clutch Plate Installer
90916 Oil Level Checker
90917 Pulley & Clutch Remover Jaws
90922 Pilot Studs
90923 Internal Retaining Ring Plier
90926 Clutch Installing Pilot
91047 Metal Tool Box
91052 Clutch Plate Installer
91059 Bearing & Pulley Installer
91073 Sanden 505 Seal Seat Remover
91074 Sanden 505 Bearing & Pulley
Installer
91075 Sanden 505 Seal Protector Sleeve
91076 Pulley & Clutch Remover Jaws
91077 Shaft Protector Pilot
91146 Feeler Gauge Set
All tools available individually.

91295
MASTER IMPORT COMPRESSOR CLUTCH, SEAL & BEARING SERVICE TOOL SET
Includes all the tools necessary to replace seals, clutches and clutch bearing
on Diesel Kiki (Zexel), Hitachi, Mitsubishi, Nippondenso, Seiko-Seiki and
Sanden 505, 507, 508, 510, 575, 708 and 709. Complete with tool box
and instructions.
Contains:
90385 York Seal Remover & Installer
90386 Compressor Holding Fixture
90390 Diesel Kiki Bearing Drive
90396 Diesel Kiki Clutch Installer
90443 Pulley Bearing Remover & Installer
90451 Pulley Arbor
90457 Puller Body
90499 Universal Clutch Holding Tool
90906 Seal Remover & Installer
90907 Seal Protector Sleeve
90910 Clutch Plate Installer
91011 Nippondenso Clutch Plate Remover
91047 Metal Tool Box
91044 Diesel Kiki Nut Remover
91045 Diesel Kiki Plate Remover
91052 Sanden Plate Installer
91058 Pulley Removal Jaws
91059 Bearing & Pulley Installer
91060 Seal Seat Remover
91061 Seal Seat Installer
91073 Sanden 505 Seal Seat Remover
91074 Sanden 505 Bearing & Pulley Installer
91075 Sanden 505 Seal Protector Sleeve
91090 Mitsubishi Seal Seat Remover
91091 Mitsubishi Seal Remover & Installer
91134 Diesel Kiki Clutch Puller Thrust Pin
91135 Diesel Kiki Retainer Ring Installer
91136 Mitsubishi/Sanden Clutch Plate Remover
91137 Diesel Kiki Pulley Puller Pilot
91138 Diesel Kiki Seal Remover & Installer
91139 Diesel Kiki Seal Seat Remover & Installer
91146 Universal Feeler Gauge Set
91171 Mitsubishi Seal Remover Lock Sleeve
91183 Air Conditioning Manual
91311 Hitachi Spanner Plug Remover & Installer
All tools available individually.


INSTRUCTIONS (pdf)
91269
SEAL SERVICE KIT
General Motors A6, R4, Late DA6, HR-6, V5, 6 Pole R4 Seal Set Includes the tools needed to replace seals on GM compressors from the early sixties through the current model year as well as Tecumseh HR-980.
Contains:
90383 Internal Snap Ring Pliers
90412 O-Ring Seal Sleeve Remover
90414 Seal Seat Remover
90415 Seal Remover & Installer
90454 Clutch Plate Remover (Coarse Thread)
90458 Clutch Plate Installer (Coarse Thread)
90460 O-Ring Installation Guide
90462 Seal Seat Installer
90484 Seal Protector
90486 Ceramic Seal Installer
90499 Universal Clutch Holding Tool
91195 Clutch Plate Removal Arbor

91270
SPECIAL GM DA6 SEAL SET

For carbon type seals used with tools from Set 91269.
Contains:
91208Seal Remover & Installer
91211 Shaft Protector
91212 Clutch Plate Remover (Metric Thread)
91213 Clutch Plate Installer (Metric Thread)
91214O-Ring & Snap-Ring Installer
91215 O-Ring Installation Guide

91271
FORD FS6, CHRYSLER C171, NIPPONDENSO 6P 148A, TECUMSEH HR-980 SEAL SET
All specialized tools needed when replacing seals on the above compressors.
Contains:
91052 Clutch Plate Installer 91122 Clutch Plate Remover
91060 Seal Seat Remover 91202 O-Ring Installation Guide
91061 Seal Seat Installer


INSTRUCTIONS (pdf)
91000-A
DELUXE CLUTCH HUB PULLER/INSTALLER KIT
Kit contains a complete offering of A/C compressor clutch hub pullers and installers for GM, Ford, Chrysler and Imports. Includes a compressor identification chart and comes in a custom molded case.

90499
UNIVERSAL CLUTCH HOLDING TOOLS

92329
TOYOTA A/C DISCONNECT TOOL
The new Toyota spring lock A/C hose couplings require this special disconnect tool. Simply insert the end of the tool into the coupling to disengage the hose.

91320
NIPPONDENSO 10 PA17 SEAL SET
Includes all tools necessary to replace seals on Nippondenso. Used with tools from Set 91269.
Contains:
91352 Plastic Box
91317 Shaft Seal Remover
91318 Shaft Seal Installer
91319 Shaft Protector
91329 Internal Snap-Ring Remover

91002
GM & FORD ORIFICE TUBE REMOVER/INSTALLER
Used on all GM (CCOT) and Ford (FOTCC) systems with evaporator inlet orifice tube.

91008
FORD (FOTCC) REMOVER/INSTALLER
Used for Ford systems produced after 1980.

91009
GM (CCOT) & FORD (FOTCC) SCREEN EXTRACTOR
Used with 91002 and 91008

91010
FORD AEROSTAR EXPANSION TUBE REMOVER/INSTALLER
Special design for condenser mounted tube.

92311
DELUXE ORIFICE TUBE SERVICE KIT
This 5 piece universal kit will remove and install any style orifice tube. Comes in custom molded box.

91273
SANDEN 507/508/510 SEAL SET
All specialized tools needed when replacing seals on Sanden Model 507, 508 and 510 compressors. Used with tools from Set 91269.
Contains:
90902 Clutch End Plate Puller
90906Seal Remover & Installer
90907 Seal Protector Sleeve
90910 Clutch Face Plate Installer

91332
FORD FX-15/FS-10 SERVICE SEAL SET
Includes all special tools needed to replace the seals on FX-15/FS-10 compressor.
Contains:
91352 Plastic Box
91326 Shaft Seal Remover
91327 Shaft Seal Installer
91328 Shaft Protector (16 Spline)
91329 Internal Snap-Ring Remover

© Mastercool Inc. 2011
Featured Items Site Map