|
|
69788
RECOVERY/RECYCLE/RECHARGE
| • |
Quality performance year after year |
| • |
Design Certified for Compliance with SAE J2788
New A/C systems are smaller. Machines must charge within .5 oz and recover 95% of the refrigerant. |
| • |
Automatic/Programmable or Manual
The 69788 can be programmed to complete a continuous recovery/recycle, vacuum, vacuum leak test and recharge. The machine can also be set to run each operation individually. |
| • |
Includes Refrigerant Capacity Database (over 1000 vehicles)
Includes refrigerant capacities for US and Import makes and models from 1995 to 2010. The 69788 is capable of software upgrades as well. |
| • |
Auto Vacuum Leak Test
Pauses cycle and monitors vacuum level to inform the technician of possible leaks. |
| • |
Auto Oil Discharge
Oil is automatically discharged during the recovery process into a graduated container clearly displaying the amount of oil that was removed during the recovery process. |
| • |
Auto Air Purge
Automatically purges air from the tank upon initial start-up or when the tank pressure is too high. |
| • |
Auto Filter Alarm
The machine’s LCD and alarm will warn that a filter change is required. |
| • |
Compact Footprint
The machine’s compact design makes it easy to maneuver and requires minimal shop space. |
| SPECIFICATIONS: |
|
•
|
115 V / 60 Hz |
|
•
|
6 CFM Vacuum Pump |
|
•
|
Internally mounted 30 lb. DOT tank |
|
•
|
Dimensions: 41” H x 24” W x 22” D |
|
•
|
Weight: 187 lbs. |
|
|
|
69788-A
R134a RECOVERY/RECYCLE/RECHARGE
AVAILABLE SPRING 2013
| • |
Quality performance year after year
|
| • |
Large Display: 4.8” (w) x 1.7” (h) (122mm (w) x 42mm (h))
|
| • |
Design Certified for Compliance with SAE J2788
New A/C systems are smaller. Machines must charge within .5 oz and recover 95% of the refrigerant. |
| • |
Automatic/Programmable or Manual
The 69788-A can be programmed to complete a continuous recovery/recycle, vacuum, vacuum leak test and recharge. The machine can also be set to run each operation individually. |
| • |
Includes Refrigerant Capacity Database (over 1000 vehicles)
Includes refrigerant capacities for US and Import makes and models from 1995 to 2012. The 69788-A is capable of software upgrades as well. |
| • |
Auto Vacuum Leak Test
Can be programmed to perform a vacuum leak test and will inform the technician of possible leaks. |
| • |
Auto Oil Discharge
Oil is automatically discharged during the recovery process. If oil is present, it will drain into a graduated container clearly displaying the amount of oil that was removed. |
| • |
Auto Air Purge
Automatically purges non-condensable gas (NCG) from the storage tank during recovery. |
| • |
Auto Filter Alarm
The machine’s LCD and alarm will warn that a filter change is required. |
| • |
Compact Footprint
The machine’s compact design makes it easy to maneuver and requires minimal shop space. |
| • |
Full Tank Alarm
Notifies operator when tank is full. |
| • |
Low Refrigerant Alarm
Notifies operator when refrigerant is low. |
| SPECIFICATIONS: |
|
•
|
Type of Refrigerant: R134a |
| • |
Service Procedure: Automatic/Programmable or Manual |
| • |
Voltage: 115 V / 60 Hz |
| • |
Scale Resolution: .02 lb (10g) |
| • |
Working Temperature: 59/120˚F (11/49˚C) |
| • |
Filter System: 2 filters for humidity |
| • |
Vacuum Pump: 6 CFM (100 litre/min) |
| • |
Compressor: Hermetically sealed, 12cc, high pressure |
| • |
Recovery Cylinder: Internally mounted 30 lb. DOT tank |
| • |
Hoses: 96” (250cm) |
| • |
Couplers: Manual |
|
•
|
Bottle Temperature Sensor: Integrated |
|
•
|
Bottle Heater: Standard Equipment |
|
•
|
Dimensions: 40.25” (h) x 22.75” (w) x 20” (d) (102 x 58 x 51 cm) |
|
•
|
Weight: 157 lbs (71 kg) |
|
|
|
69789
FULLY AUTOMATIC R134a RECOVERY/RECYCLE/RECHARGE
AVAILABLE SPRING 2013
| • |
Quality performance year after year
|
| • |
Large Graphic Display: 4.3” (w) x 2.4” (h) (110mm (w) x 60mm (h)) |
| • |
Design Certified for Compliance with SAE J2788
New A/C systems are smaller. Machines must charge within .5 oz and recover 95% of the refrigerant. |
| • |
Automatic/Programmable or Manual
The 69789 can be programmed to complete a continuous recovery/recycle, vacuum, vacuum leak test and recharge. The machine can also be set to run each operation individually. |
| • |
Includes Refrigerant Capacity Database (over 1000 vehicles)
Includes refrigerant capacities for US and Import makes and models from 1995 to 2012. The 69789 is capable of software upgrades as well. |
| • |
Auto Vacuum Leak Test
Can be programmed to perform a vacuum leak test and will inform the technician of possible leaks. |
| • |
Auto Oil Discharge
Oil is automatically discharged during the recovery process. If oil is present, it will drain into a graduated container clearly displaying the amount of oil that was removed. |
| • |
Auto Air Purge
Automatically purges non-condensable gas (NCG) from the storage tank during recovery. |
| • |
Auto Filter Alarm
The machine’s LCD and alarm will warn that a filter change is required. |
| • |
Compact Footprint
The machine’s compact design makes it easy to maneuver and requires minimal shop space. |
| • |
Full Tank Alarm
Notifies operator when tank is full. |
| • |
Low Refrigerant Alarm
Notifies operator when refrigerant is low. |
| • |
Automatic Oil Injection
With electronic scale to protect the contents against contact and ambient humidity.
|
| • |
Thermal Printer
For a complete, detailed report.
|
| SPECIFICATIONS: |
|
•
|
Type of refrigerant: R134a
|
| • |
Service Procedure: Fully automatic or manual
|
| • |
Voltage: 115 V / 60 Hz
|
| • |
Scale Resolution: .02 lb (10g)
|
| • |
Oil Scale Resolution: .01 lb (5g)
|
| • |
Working Temperature Range: 59/120˚F (11/49˚C)
|
| • |
Filter System: 2 filters for humidity
|
| • |
Vacuum Pump: 6 CFM (100 litre/min) capacity, (.001 psi) 0.1 mbar vacuum level
|
| • |
Compressor: Hermetically sealed, 12cc, high pressure
|
| • |
Recovery Speed: .66 lb/min (300g/min) in liquid phase
|
| • |
Recovery Cylinder: 30 lb (22 litres), refillable
|
| • |
Hoses: 96” (250cm)
|
| • |
Couplers: Manual
|
| • |
Thermal Printer: Standard Equipment
|
| • |
Pressure Gauges: Class 1
|
|
•
|
Bottle Temperature Sensor: Integrated
|
|
•
|
Bottle Heater: Standard Equipment
|
|
•
|
Dimensions: 41.3” (h) x 23.6” (w) x 21.6” (d) (105 x 60 x 55 cm)
|
|
•
|
Weight: 176 lbs (80 kg) |
|
|
|
69789-H
R134a & HYBRID
RECOVERY/RECYCLE/RECHARGE
AVAILABLE SPRING 2013
| • |
Quality performance year after year
|
| • |
Large Graphic Display: 4.3” (w) x 2.4” (h) (110mm (w) x 60mm (h)) |
| • |
Design Certified for Compliance with SAE J2788
New A/C systems are smaller. Machines must charge within .5 oz and recover 95% of the refrigerant. |
| • |
Automatic/Programmable or Manual
The 69789-H can be programmed to complete a continuous recovery/recycle, vacuum, vacuum leak test and recharge. The machine can also be set to run each operation individually. |
| • |
Includes Refrigerant Capacity Database (over 1000 vehicles)
Includes refrigerant capacities for US and Import makes and models from 1995 to 2012. The 69788-H is capable of software upgrades as well. |
| • |
Auto Vacuum Leak Test
Can be programmed to perform a vacuum leak test and will inform the technician of possible leaks. |
| • |
Auto Oil Discharge
Oil is automatically discharged during the recovery process. If oil is present, it will drain into a graduated container clearly displaying the amount of oil that was removed. |
| • |
Auto Air Purge
Automatically purges non-condensable gas (NCG) from the storage tank during recovery. |
| • |
Auto Filter Alarm
The machine’s LCD and alarm will warn that a filter change is required. |
| • |
Compact Footprint
The machine’s compact design makes it easy to maneuver and requires minimal shop space. |
| • |
Full Tank Alarm
Notifies operator when tank is full. |
| • |
Low Refrigerant Alarm
Notifies operator when refrigerant is low. |
| • |
Automatic Oil Injection
With electronic scale to protect the contents against contact and ambient humidity.
|
| • |
Thermal Printer
For a complete, detailed report.
|
| • |
Fully Integrated Real “Loop,” Flushes Service Hoses Only by Refrigerant Circulation
Flushing eliminates the risk that residues of different (non-insulating) oils may be injected into the A/C system, jeopardizing its safety and operation.
|
| • |
High Voltage Protection
|
| • |
Used on all Hybrid and R134a Vehicles
|
| SPECIFICATIONS: |
|
•
|
Type of refrigerant: R134a
|
| • |
Service Procedure: Fully automatic or manual
|
| • |
Voltage: 115 V / 60 Hz
|
| • |
Scale Resolution: .02 lb (10g)
|
| • |
Oil Scale Resolution: .01 lb (5g)
|
| • |
Working Temperature Range: 59/120˚F (11/49˚C)
|
| • |
Filter System: 2 filters for humidity
|
| • |
Vacuum Pump: 6 CFM (100 litre/min) capacity, (.001 psi) 0.1 mbar vacuum level
|
| • |
Compressor: Hermetically sealed, 12cc, high pressure
|
| • |
Recovery Speed: .66 lb/min (300g/min) in liquid phase
|
| • |
Recovery Cylinder: 30 lb (22 litres), refillable
|
| • |
Hoses: 96” (250cm)
|
| • |
Couplers: Manual
|
| • |
Thermal Printer: Standard Equipment
|
| • |
Pressure Gauges: Class 1
|
|
•
|
Bottle Temperature Sensor: Integrated
|
|
•
|
Bottle Heater: Standard Equipment
|
|
•
|
Dimensions: 41.3” (h) x 23.6” (w) x 21.6” (d) (105 x 60 x 55 cm)
|
|
•
|
Weight: 176 lbs (80 kg) |
|
|
